02 8748 6888     

StarTech 2x M.2 SSD Solid State Driver PCI Expree Controller Card

SKU: STECPN4416

Availability: Available for order, Usually ships within 2 to 5 business days.

• Improve system performance, recover data, or create a redundant data backup by adding two M.2 solid-state drives (SSD) to your desktop PC
• Wide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230)
• Two M.2 B-Key onboard sockets that support SATA III transfer speeds up to 6Gbps
$109.00

Be the first to review this product

Specification

Manufacturer NumberPEX2M2
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Chipset ID ASMedia - ASM1062
Industry Standards Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
PCI Express 2.0
Interface M.2 SATA (NGFF)
Port Style Integrated on Card
Ports 2
Performance
Port Multiplier No
RAID No
Type and Rate SATA III (6 Gbps)
Connector(s)
Connector Type(s) 1 - PCI Express x4 Male
Internal Ports 2 - M.2 (NGFF; B-Key) Receptacle
1 - SP4 (4 pin; Small Drive Power) Male
Software
OS Compatibility OS Independent; No additional drivers or software required
Special Notes / Requirements
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
System and Cable Requirements PCI Express x4 slot (backward compatible with x8, and x16 slots)
Environmental
Humidity 20%~80% RH (Non-condensing)
Operating Temperature 5C to 50C (41F to 122F)
Storage Temperature -25C to 70C (-13F to 158F)
Physical Characteristics
Product Height 4.7 in [120 mm]
Product Length 7.1 in [180 mm]
Product Weight 2.3 oz [64 g]
Product Width 0.8 in [20 mm]
Warranty1 Year Manufacturer Warranty
Estimate Shipping

Enter your destination to get a shipping estimate.

  • Yes No

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.