|ADSL2/2+ & VDSL||Compliant with ITU-T VDSL2 G.993.2|
|Compliant with G.997.1|
|Band Plan: 998, 997|
|Annex A, Annex B|
|VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a|
|UPBO, DPBO Supported|
|Compatible with POTS, PSTN|
|Capability Fall back to ADSL2/2+ Standards|
|WAN Protocol||DHCP Client|
|3.5G Connection and Backup|
|Content Security Management||IM/P2P Applications Filter|
|URL Content Filter|
|GlobalView Web Content Filter (Powered by CYREN-90 )|
|Firewall||DMZ Host, Open Port, Port-redirection|
|Local Filter with QoS|
|MAC Address Filter|
|SPI (Stateful Packet Inspection)|
|Logging via Syslog|
|Bind IP to MAC Address|
|Time Schedule Control|
|VPN||2 VPN Tunnels|
|IPsec Encryption: AES, 3DES, DES|
|IPsec Authentication: MD5, SHA-1|
|IPsec DPD (Dead Peer Detection)|
|IPsec Aggressive Mode|
|IKE Authentication: Pre-shared Key, X.509|
|L2TP over IPsec|
|DHCP over IPsec*|
|Network Feature||DHCP Server/Client|
|UPnP 30 sessions (at least)|
|Network Management||Web-based User Interface (HTTP/HTTPS)|
|Quick Start Wizard|
|CLI (Command Line Interface, Telnet/SSH)|
|Built-in Diagnostic Function|
|Firmware Upgrade via WUI|
|Multi-level User Management|
|Administration Access Control|
|Logging via Syslog|
|Management Session Time out|
|SNMP Management MIB-II|
|Data Flow Monitor|
|Wireless AP||Support 2T2R 2.4GHz, Single Band|
|64/128-bit WEP, WPA/WPA2|
|MAC Address Access Control|
|Wireless Client List|
|Access Point Discovery|
|WDS (Wireless Distribution System)|
|USB Port||Printer Sharing|
|FAT32/NTFS file system|
|FTP function for file sharing|
|3G as Back Up|
|NAS Facility (Add a USB Memory Sticks or USB Hard Drives for Shared LAN Multimedia Storage/Access)|
|The Above Mentioned NAS Also Support a Built-in DLNA Server*|
|Bandwidth Management||Layer 3 QoS by IP, Port, Protocol|
|VOIP||Protocol: SIP, RTP/RTCP|
|6 SIP Registrars|
|G.168 Line Echo-cancellation|
|PSTN Loop Through|
|G.711 A/u law|
|VAD / CNG|
|Out Band (RFC-2833)|
|FAX/Modem Support :|
|T.38 for fax Sending/Receiving|
|Call Hold / Retrieve|
|CLIR (Calling Line Identification Restriction)|
|Call Forwarding (Always, Busy and No Answer)|
|DND (Do Not Disturb)|
|MWI (Message Waiting Indicator) (RFC-3842)*|
|Warranty||2 Years Manufacturer Warranty|
Enter your destination to get a shipping estimate.
Yes / No
What Does Digitalstar Stock Status Mean?
We have Three Main Stock Status
"In Stock" - This means last time stock was checked the item was in our physical warehouse. If you need something urgently please place an order online for In store pickup and we will notify you when your order is ready. In Stock delivery orders are normally dispatched next business day after cleared payment received.
"In Stock, Ships ASAP" - This means last time stock was checked the item was in our suppliers warehouse - It will take approximately 2 - 5 business days from when order is placed to the order is dispatched
"Pre-Order" - This means last time stock was checked the item had no estimated time of arrival or a long eta that could not be relied upon. Please contact us for more detailed eta information on this stock.
Can I pick up my order?
Yes, you can. Please contact us first before you come to pick up to ensure we have stock. Or place order online and choose in store pick up, once your order has been reserved by our staff you will be notified that you can collect anytime.
For Some Special order items our sales staff may call you to arrange a deposit before we order in or to hold an item for a longer period of time.
How are orders sent?
The service we use for most of our deliveries is eParcel - the corporate division of Australia Post. eParcel strives for prompt and safe shipping right around Australia. Some larger items (over 20kg) which get dispatched directly from suppliers are shipped with selected leading nation wide couriers. Items sent via courier will require a street address as they cannot deliver to PO Boxes.
How do I track my order shipping status?
Once your order has been dispatched you will receive an email including online tracking details. You can contact Australia Post directly on 13 13 18 if your item has been sent by eParcel. Please be sure to have your eParcel tracking number handy when you call. or you can visit http://auspost.com.au/track/ to track your delivery on line. Please allow 48 hours for the items to show on the tracking site as they may not be scanned in straight away.
Please allow 48 hours for the items to show on the tracking site as they may not be scanned in straight away.
Do you ship items outside Australia?
What should I do if an item is missing from my order?
First, verify that you've received a box for each tracking number associated with your order. If all boxes have been delivered but you're still missing an item, check the packing material for small items. Please contact Digital Star Customer Service via Help Desk Ticket if you're unable to locate an item.
How long does delivery usually take?
In most cases in stock items are able to dispatch items within 24 hours of your payment being received. Once items are dispatched, regular Australia Post times apply. Please note there is no dispatch or delivery on weekends or public holidays. Payment via Fund Transfer usually take 1 - 2 workings to reach our account.
To Sydney Metro Areas: 2 -3 Business Days.
To NSW Country Areas: 4 - 5 Business Days.
To Brisbane, Melbourne, Canberra Metro Areas: 2 - 5 Business Days.
To Adelaide Hobart Metro Areas: 4 - 7 Business Days.
To Other State Country Areas: 5 - 8 Business Days.
How long is the waiting period before I am able to file a claim for a lost, damaged, misdelivered or tampered package?
If your order was damaged, misdelivered or tampered with while in transit, please contact Customer Service within 3 business days of delivery. If your order was lost while in transit, please contact Customer Service within 7 business days of not receiving your order. Click Here to Contact Us via Help Desk Ticket.