02-8748 6888

D-Link DSL-2750U Wireless N300 802.11n ADSL2+ WIFI Modem Router


Availability: In stock

• Integrated ADSL2+ Modem
• NBN/UFB Ready
• 5 dBi antennas for additional wireless coverage
• Four 10/100 Ethernet ports
• SAMBA Network Support for USB Drives

Regular Price: $79.95

Special Price $49.00

Be the first to review this product


Manufacturer NumberDSL-2750U
Device Interfaces RJ-11 ADSL port
4 RJ-45 10/100BASE-TX Ethernet ports with auto MDI/MDIX
Built-in 802.11n wireless LAN
Factory reset button
WPS button
Wireless on/off switch
USB 2.0 port
Wireless LAN 2 x 5dBi non-removable antennas
802.11b/g/n standards
Wireless speed: up to 54Mbps (802.11G), 300Mbps (802.11n)
Frequency: 2.4 GHz to 2.484G Hz
Dual 2x2 built-in MIMO antennas
64/128 bits WEP data encryption
WPA/WPA2 (Wi-Fi Protected Access)
Multiple SSID
802.11e Wireless QoS (WMM/WME)
MAC address-based access control
ADSL Standards ADSL standards: Multi-mode, ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) Annex A, ITU G.992.2 (G.lite) Annex A, ITU G.994.1 (G.hs)
ADSL2 standards: ITU G.992.3 (G.dmt. bis) Annex A/L/M, ITU G.992.4 (G.lite. bis) Annex A
ADSL2+ standards: ITU G.992.5 Annex A/L/M
Firewall Built-in NAT firewall
Stateful Packet Inspection (SPI)
DoS attacks prevention
Packet filtering (IP/ICMP/TCP/UDP)
Intrusion Detection System (IDS)
ATM & PPP Protocols ATM Forum UNI3.1/4.0 PVC (up to 16PVCs)
ATM Adaptation Layer Type 5 (AAL5)
Bridged or Routed Ethernet encapsulation
ATM QoS (Traffic Shaping)
VC and LLC based multiplexing
PPP over Ethernet (PPPoE)
PPP over ATM (RFC 2364)
ITU-T I.610 OAM F4/F5
Virtual Private Network (VPN) Multiple PPTP/IPSec/L2TP passthrough
Security IGMP Snooping with 32 Multicast groups
PVC/VLAN port mapping (bridge mode)
Parental Control (URL blocking)
Power Input Through 12VAC 1.25A external power adapter
Warranty3 Year Warranty
Estimate Shipping

Enter your destination to get a shipping estimate.

  • Yes No

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.