02-8748 6888

D-Link DNR-2020-04P JustConnect 16-Channel PoE Network Video Recorder

SKU: DLKNP1309   |   MPN: DNR-2020-04P

Availability: Available for Order, Usually ships within 3 to 7 business days after ETA* .

• DNR-2020-04P JustConnect 16-Channel PoE Network Video Recorder is an all-in-one network video recorder (NVR)
• Record video from up to 16 network cameras to its dual HDD storage.
• With the integrated HDMI/VGA display output and USB port, users can view, control and configure the DNR-2020-04P without the need to turn on their PC.
• Featuring Power over Ethernet (PoE), the NVR supplies power to up to four PoE cameras, saving valuable time and electrical installation costs during setup.
• Powered by an embedded system, the DNR-2020-04P supports real-time remote monitoring and playback via a web browser using the NVR′s web GUI. Additionally, support for audio in/out, DI/DO triggering, and external USB 3.0 storage for video export and backups fill the needs of small businesses.

Be the first to review this product


Manufacturer NumberDNR-2020-04P
IEEE 802.3u/x/z
IEEE 802.3af
HDD Format Disk
Up to 16 TB HDD
EXT3 file system
RAID 0, 1, JBOD4
Two Reset Modes
Reset firmware GUI button
HW reset button (hold for 10 seconds)
Reset Button
Reset to factory default
Flash ROM 128 MB
RAM 1024 MB DDR3
Network Interface Gigabit Ethernet port (10/100/1000 Mbps)
I/O Ports 1 x 10/100/1000 BaseT RJ-45 port
4 x 10/100 BaseT PoE port (802.3af)
HDMI (supports 720p and 1080p resolution with 16:9 display ratio)
D-sub for VGA output
1 x USB 3.0 port3
1 x USB 2.0 port3
3.5 mm audio input x 1, output x 1
4 x DI, 1 x DO
Cooling 1 x Smart Fan
Software Features
Supported Cameras Please visit www.dlink.com for a list of supported cameras1
Supports auto-discovery and megapixel resolution
System Requirements for Web Interface Browser: Internet Explorer, Firefox, or Safari
Recording Performance Max recording bitrate: 80 Mbit/s
Primary video profile H.264 at 1080p at 480 fps
Secondary video profile H.264 at VGA at 240 fps
Camera Search UPnP, ONVIF
Audio and Video Recording Synchronised audio & video recording
Compression Format H.264, MPEG-4, M-JPEG
Audio Compression Format G.711, G.726
Video Setting Resolution, Quality, Bitrate, Frame rate, Enable audio,Video profile selection
Recording Mode Record by schedule, manual, always, and event-based recording
Motion-triggered recording
Alarm Recording Pre-alarm: 60 seconds per channel, Post-alarm: 300 seconds per channel
Remote Live View Supported via browser and Multi NVR Viewer (DCS-260) software
Remote Live View Control Live view, Preset/Go to Preset, Patrol/Auto Patrol,Focus
PTZ control, Snapshot, Full screen, Auto scan, Digital zoom (Zoom in & Zoom out)
Manual Record, Audio Enable, Adjust audio volume, Video layout, e-map
Remote Playback Control Normal, Fast forward/rewind, Step forward/rewind
Remote Playback Supported via browser and Remote Playback application
Playback system with timeline GUI, search by event, area, cameras, date, and time
Browser or Remote Playback support 16-channel simultaneous playback
Digital zoom
Overwrite Recording Auto recycling when disk storage is full
File Export Local: Export videos to AVI / MP4 format
Remote Export videos to AVI or ASF file
Export images to JPG file
Digital Watermark Tool Prevents recorded video files/snapshots from being tampered with Acts as a tool for verification
User Account Additional accounts can be created to allow users system access and specify authorization for camera channels, PTZ, etc.
DDNS D-Link DDNS and DynDns server support Manual DDNS
System Time D-Link NTP, Input timeSync with computer, Daylight saving time
Auto Backup Backup recorded data to USB/SAMBA/FTP via a schedule
Remote Backup Remote backup software can backup raw data to redundant storage
System Status Camera status, HDD status, System status, Network Service
Protocols IPV4, ARP, TCP, UDP, ICMP, DHCP Server/Client, NTP Client, DNS Client, DDNS Client
SMTP Client, FTP Client, HTTP Server, RTP, RTCP, RTSP, IP filtering, UPnP, CoS
QoS/DSCP, HTTPS, Samba, Bonjour, SNMP v1/v2c/v3, PPPoE, DDP
User Interface HTTP Web browser, NVR Search Utility, Remote Playback/Backup
Verification tool, Mobile app, GUI via HDMI/VGA
Package Contents JustConnect 16-Channel PoE Network Video Recorder, Power Adapter
Ethernet Cable, Quick Installation Guide, CD-ROM with Software Product Documentation
Weight 2.1 kg (4.63 lbs)
Power Input Input: 100 to 240 V AC, 50 to 60 Hz, Output: DC 48 V/1.85 A
Power Consumption Max. 90 W
PoE Budget Per Port: Max. 15 W, Total: 45 W
Temperature Operating: 0 to 40 °C (32 to 104 °F), Storage: -20 to 70 °C (-4 to 158 °F)
Humidity 5% to 90% non-condensing
Certifications CE, FCC, RoHS
Dimensions 63 x 225 x 300 mm
1 Please see the camera compatibility list.
2 Hard disks are not included. Supports hard disks up to 8 TB each for a total of 16 TB.
3 This port is used for firmware updates, video exports to USB drives, and backups. Connection to a USB mouse/keyboard is supported.
4 RAID 0 and RAID 1 mirroring requires the use of two internal SATA drives. To avoid data incompatibility in RAID 1 operation, use identical SATA drives from the same manufacturer. Formatted drive capacity for RAID 1 operation is dependent on the drive capacity of the lowest-sized drive. Some older generation SATA drives may not be compatible.
Warranty1 Year Warranty
Estimate Shipping

Enter your destination to get a shipping estimate.

  • Yes / No

Shipping FAQ

What Does Digitalstar Stock Status Mean?

We have Three Main Stock Status

"In Stock" - This means last time stock was checked the item was in our physical warehouse. If you need something urgently please place an order online for In store pickup and we will notify you when your order is ready. In Stock delivery orders are normally dispatched next business day after cleared payment received.

"In Stock, Ships ASAP" - This means last time stock was checked the item was in our suppliers warehouse - It will take approximately 2 - 5 business days from when order is placed to the order is dispatched

"Pre-Order" - This means last time stock was checked the item had no estimated time of arrival or a long eta that could not be relied upon. Please contact us for more detailed eta information on this stock.

Can I pick up my order?

Yes, you can. Please contact us first before you come to pick up to ensure we have stock. Or place order online and choose in store pick up, once your order has been reserved by our staff you will be notified that you can collect anytime.

For Some Special order items our sales staff may call you to arrange a deposit before we order in or to hold an item for a longer period of time.


How are orders sent?

The service we use for most of our deliveries is eParcel - the corporate division of Australia Post. eParcel strives for prompt and safe shipping right around Australia. Some larger items (over 20kg) which get dispatched directly from suppliers are shipped with selected leading nation wide couriers. Items sent via courier will require a street address as they cannot deliver to PO Boxes.


How do I track my order shipping status?

Once your order has been dispatched you will receive an email including online tracking details. You can contact Australia Post directly on 13 13 18 if your item has been sent by eParcel. Please be sure to have your eParcel tracking number handy when you call. or you can visit http://auspost.com.au/track/ to track your delivery on line. Please allow 48 hours for the items to show on the tracking site as they may not be scanned in straight away.

Please allow 48 hours for the items to show on the tracking site as they may not be scanned in straight away.


Do you ship items outside Australia?

Not yet.


What should I do if an item is missing from my order?

First, verify that you've received a box for each tracking number associated with your order. If all boxes have been delivered but you're still missing an item, check the packing material for small items. Please contact Digital Star Customer Service via Help Desk Ticket if you're unable to locate an item.


How long does delivery usually take?

In most cases in stock items are able to dispatch items within 24 hours of your payment being received. Once items are dispatched, regular Australia Post times apply. Please note there is no dispatch or delivery on weekends or public holidays. Payment via Fund Transfer usually take 1 - 2 workings to reach our account.

To Sydney Metro Areas: 2 -3 Business Days.

To NSW Country Areas: 4 - 5 Business Days.

To Brisbane, Melbourne, Canberra Metro Areas: 2 - 5 Business Days.

To Adelaide Hobart Metro Areas: 4 - 7 Business Days.

To Other State Country Areas: 5 - 8 Business Days.

How long is the waiting period before I am able to file a claim for a lost, damaged, misdelivered or tampered package?

If your order was damaged, misdelivered or tampered with while in transit, please contact Customer Service within 3 business days of delivery. If your order was lost while in transit, please contact Customer Service within 7 business days of not receiving your order. Click Here to Contact Us via Help Desk Ticket.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.